Assembly

Atenea, Hermes and Apolo   |   Atenea+Ramps   |   Lateral framing profiles for recessed doormats

 

  • Instrucciones de montaje. Basmat Atenea, Hermes y Apolo.
  • Instrucciones de montaje. Basmat Atenea, Hermes y Apolo.
    Place the self-adhesive black foam strips paralelly to each (5 strips per metre) with the adhesive part facing upwards. Peel off the protective paper a few centimeters. The exterior foam strips must be at a distance of 5cm maximum from the edge. Install first the profile with the Basmat label.
  • Instrucciones de montaje. Basmat Atenea, Hermes y Apolo.
    Keep placing the Basmat profiles clicking one into the next one and sticking them down to the black foam.
  •  
  • Instrucciones de montaje. Basmat Atenea, Hermes y Apolo.
  • Instrucciones de montaje. Basmat Atenea, Hermes y Apolo.
    Continue the process until the last profile and adjust Basmat in the mat well. Insert the foam tubes under the initial and final wings.
  • Instrucciones de montaje. Basmat Atenea, Hermes y Apolo.
    Fix Basmat to the floor with adhesive. If desired, Basmat can be screwed to the floor (see 7 and 8).
  •  
  • Instrucciones de montaje. Basmat Atenea, Hermes y Apolo.
    Retire partially or slide the finish strips. Drill the initial and ending profile.
  • Instrucciones de montaje. Basmat Atenea, Hermes y Apolo.
    Screw Basmat to the floor. Stick the finish strips to the aluminium profiles.